VK-2.50BL | For 2-1/2″ Dia Roller – 90 Shore “A” Blue Vinyl – Length 10 Ft – Max. Temp 150F

$107.10

90 Shore “A” Blue “Vinyl” in 10 Foot Lengths

Fits Roller O.D.: 2-1/2″
Wall Thickness: 1/8″

PVC roller covering that is a simple, cost-effective alternative to dip coating. With its smooth, uniform 1/8″ wall thickness, Vinyl-Koat® eliminates the inconsistent thickness and surface irregularities (drips, runs and sags) of dip coating, eliminating machining and bearing contamination. <PVC roller covering that is a simple, cost-effective alternative to dip coating. With its smooth, uniform 1/8″ wall thickness, Vinyl-Koat® eliminates the inconsistent thickness and surface irregularities (drips, runs and sags) of dip coating, eliminating machining and bearing contamination. *CORE SHOWN IN PHOTOS NOT SUPPLIED

NOTE: Contact us to have Kastalon install your Koat-A-Roll®.

Order installation tools and quantity of Vinyl-Koat below:

BD-3580-2 - 1 Pint 3580 2-Part Bond Adhesive | For Drive Roller Installation

Kit Size: 1 Pint / 2-Part Bonding Adhesive

For complete installation instructions, CLICK HERE
3580 Bond is an industrial strength two-part bond that allows for permanent adhesion of the sleeve to the roller.

*This installation product is only available with a combined purchase of a Koat-A-Roll® and Vinyl-Koat® roller sleeves.

K-2.50-NZ – Installation Assembly Nozzle with Handle

Koat-A-Roll® Assembly Nozzle with Handle
Using compressed air, this uniquely designed nozzle assists the installation of sleeves to the roller. The universal handle fits all size nozzles.

*This installation product is only available with a combined purchase of a Koat-A-Roll® and Vinyl-Koat® roller sleeves.

K-LB-2 - K-Lube® Assembly Lubricant 1 Quart | For Idler Roller Installation

1 Quart / Spray Bottle

For complete installation instructions, CLICK HERE
K-Lube simplifies installation of sleeves by providing a specially formulated temporary lubricant used to coat the roller prior to blowing on all sleeve materials.

*This installation product is only available with a combined purchase of a Koat-A-Roll® and Vinyl-Koat® roller sleeves.

Description

Vinyl-Koat® Roller Sleeves
Vinyl-Koat®’s excellent chemical resistance makes this material especially attractive for corrosive and hostile environments, e.g. battery changers or automated washing systems. By absorbing shock and wear, full roller loads will be effective throughout the coating’s entire life.

Providing the same exceptional characteristics as Koat-A-Roll® polyurethane roller sleeves, Vinyl-Koat® is a PVC roller covering that is a simple, cost-effective alternative to dip coating. With its smooth, uniform 1/8″ wall thickness, Vinyl-Koat® eliminates the inconsistent thickness and surface irregularities (drips, runs and sags) of dip coating.

Secondary machining and bearing contamination are also eliminated as Vinyl-Koat® is quickly installed over assembled rollers.

Stocked in 1/8″ wall 60 Shore A Gray color and 90 Shore A Blue for 1.90″ and 2-1/2″ rollers.
Additional Vinyl-Koat® sizes, colors, hardnesses and wall thicknesses are available on a special order basis.

Additional information

Weight 9.0 lbs
Dimensions 63 × 7 × 7 in
Part #: VK-2.50BL

Fits Roller O.D.: 2-1/2"
Wall Thickness: 1/8"
Length: 10 feet
Temp: Max Temp 150F
Hardness: 90 Shore “A”
Color: Blue

Installation Instructions

For complete installation instructions, visit https://www.kastalon.com/literature-downloads/

Physical and Mechanical Properties

View our physical and mechanical properties:
https://www.kastalon.com/koat-a-roll-products/vinyl-koat/properties/

Reviews

There are no reviews yet.

Be the first to review “VK-2.50BL | For 2-1/2″ Dia Roller – 90 Shore “A” Blue Vinyl – Length 10 Ft – Max. Temp 150F”

Your email address will not be published. Required fields are marked *