Vinyl-Koat® is outstanding as a protective covering for harsh applications

Vinyl-Koat®'s excellent chemical resistance makes this material especially attractive for corrosive and hostile environments, e.g. battery changers or automated washing systems. By absorbing shock and wear, full roller loads will be effective throughout the coating's entire life.

Providing the same exceptional characteristics as Koat-A-Roll® polyurethane roller sleeves, Vinyl-Koat® is a PVC roller covering that is a simple, cost-effective alternative to dip coating. With its smooth, uniform 1/8" wall thickness, Vinyl-Koat® eliminates the inconsistent thickness and surface irregularities (drips, runs and sags) of dip coating.

Secondary machining and bearing contamination are also eliminated as Vinyl-Koat® is quickly installed over assembled rollers.

Stocked in 1/8" wall 60 Shore A gray color and 90 Shore A blue for 1.90" and 2.50" rollers.
Additional Vinyl-Koat® sizes, colors, hardnesses and wall thicknesses are available on a special order basis.

MAXIMUM TEMPERATURE 150°F

60 Shore "A" Gray Vinyl
FITS ROLLER O.D. WALL THICKNESS PART #
1.90 1/8 in. VK-1.90 ORDER
2.50 1/8 in. VK-2.50 ORDER
60 Shore "A" Black Vinyl - Matte Finish
FITS ROLLER O.D. WALL THICKNESS PART #
1.50 3/16 in. VK-1.50/.18-60A-M ORDER
90 Shore "A" Blue Vinyl
FITS ROLLER O.D. WALL THICKNESS PART #
1.90 1/8 in. VK-1.90BL ORDER
2.50 1/8 in. VK-2.50BL ORDER

The information herein is believed to be reliable, but is not to be construed as a warrantee or representation for which we assume legal responsibility. Users should undertake sufficient verification and testing to determine the suitability for their own particular purpose of any information or products referred to herein.